Topographic Maps Included
No extra maps to buy. Includes XMap USA Topographic Data DVD base data with full, updated U.S. topographic and street maps to export as needed to your PN-20. Also includes an on-device highway-level world base map.
View Aerial Imagery in the Field
Download imagery views from DeLorme’s growing library of aerial imagery including Color DOQQs, Sat-10 colorized satellite imagery, and scanned USGS 7.5-minute quads using XMap 5.2’s NetLink tab.
Multiple Views of the Same GPS Location
On-device data layering lets you select which map or imagery type to see for your GPS location. Switch among data types to gain a comprehensive view of where you are—it’s revolutionary and provides a whole new level of geographic detail.
Access Recent Aerial Imagery at Low or No Cost
Recent and hi-resolution aerial imagery is often made available for no cost or low cost at GIS Web sites sponsored by local, state or federal government agencies. These images are usually stored in a GeoTIFF or MrSID format. These formats enable file compression for storage and provide geographic projection information to position the images correctly on a map. This means you can easily download the files and un-zip them into XMap, accurately geo-referenced against a DeLorme base map. XMap 5.2 extends the use of these aerial imagery file formats to the Earthmate GPS PN-20. GeoTIFF and MrSID support is available with all XMap versions. This powerful capability just put aerial imagery in the hands of your field technicians, students or officers.
Bright Color Screen
Works in bright sunlight to total darkness. Sharp® brand screen
featuring the latest transflective screen technologies to maximize visibility
under a variety of lighting conditions.
Rugged and Waterproof
Conforms to IPX-7 waterproof standard with impact-resistant rubberized housing for a solid grip. Concealed battery compartment with SD card slot. Includes two AA batteries (Travel Power Kit available separately or as part of several value bundles listed at right).
High-Performance Technology
Features STMicroelectronics chipset with SiGE RF front-end and
DeLorme firmware for outstanding signal acquisition and retention. Works
equally well under dense foliage or in-vehicle.
View XMap GIS Objects
Export GIS project views, developed within XMap GIS 5.2, to the PN-20. Collect GPS points or log files that enhance the value of your critical GIS data.
Easy Exchange of Maps, Tracks, and Waypoints
Exchange pre-cut multi-state routable regions between XMap 5.2 on the desktop to the GPS or select only the specific, customized areas you want—topographic maps and imagery. Exchange routes, tracks, and waypoints between the GPS and XMap 5.2 (two-way transfers).
Extensive On-device Memory
75MB of internal flash memory available in addition to the preloaded world base map. Holds up to ten tracks (10,000 points per track); 1,000 user-defined waypoints; and 50 routes. SD slot also available.
Powerful XMap Topographic GIS Software Included
The included XMap 5.2 GIS Editor PN-20 software is loaded with additional capabilities for use on a desktop PC. Create GIS projects, site assessments, work routes, elevation profiles, and realistic 3-D flyovers.
The Device Setup Page
The Device Setup Page options let you modify the default
settings on the Earthmate GPS PN-20 such as the battery type, backlight
settings, and more.
System Settings
Use to update GPS settings, WAAS status, battery type, and/or USB power
setting.
Display Settings
Use to update the device's color scheme, backlight intensity, and/or backlight
timer.
Interface Settings
Use these settings to change the serial port and USB settings on the device. The settings you choose will be based on the type of cable you are using to connect the device to your computer, your computer’s operating system, and if you are trying to access information on the removable media (SD) card.
Sound Settings
Use to modify the device's button press sound, message sound, power sound, turn
alert sound, and/or volume of all sounds.
Page Order Settings
Use to change the Page order, add a Page to the Page button sequence, and/or
hide a Page.
Time Settings
Use to modify the device's time format, time zone, and/or Daylight-Saving Time
preferences.
Units Settings
Use to modify the primary coordinates, secondary coordinates, the datum, the
measures, the bearing.
The Satellite Page
Once you turn on the Earthmate GPS PN-20, the Satellites Page
displays. It informs you of your current GPS status, the number of satellites
the Earthmate is acquiring data from, the signal strength, and the GPS accuracy
(only available when a 2-D or 3-D fix is obtained).
Satellite Constellation and Signal Graph
Both the satellite constellation and the satellite signal graph display visible
satellites and their number (assigned by the Department of Defense).
GPS Accuracy
This screen will display GPS accuracy, in the lower-left corner of the screen,
in feet or meters (according to the preference you have set). GPS accuracy is
represented on the map by a circle with a radius equal to the GPS accuracy,
allowing you to see a representation of their accuracy in relation to
your map scale. The accuracy of the Earthmate GPS PN-20 is +/- 10 meters.
Battery Indicator
The battery indicator is a graphic representation of the current available
battery power.
To Disable GPS
There are many features on the Earthmate GPS PN-20 that do not require a GPS
fix. You can turn off the GPS connection using the Disable GPS option in the
Satellites menu.
The Map Page
If a 2-D or 3-D fix is obtained, the Map Page displays the map
data available for your current GPS location. If a GPS fix cannot be obtained,
the location of your last GPS fix displays on the map.
Map Data
Earthmate GPS PN-20 comes standard with a base map showing high-level world and
U.S. coverage. The base map cannot be removed from memory.
There are several data types compatible with the Earthmate GPS
PN-20:
- » XMap OpenSpace
- » Aerial Data Packet (ADP) data
- » XMap MrSID and GeoTIFF files
- » Image Registration data
- » DOQQ (Aerial Imagery)
- » 3DTQ (USGS Quads)
- » Sat 10 data (Satellite Imagery)
- » USA Topographic Data (Detailed street and topographic maps)
The Compass Page
The Compass Page provides a graphic representation of a traditional floating needle compass. It displays differently depending on if you are navigating (following a route) or tracking. The compass rotates so that the heading is always up. If you are navigating, the compass displays a bearing arrow that points in the direction of the next stop in the route.
The Trip Info Page
The Trip Info Page contains eight information fields that occupy the entire screen (three information fields display if the Earthmate is in large-text mode). Each field is customizable with one of the many available information field options.
The Find Page
You can use the Find button (the button that displays with a
magnifying glass) to search for addresses, roads, cities, waypoints,
coordinates, and more. There are two Find search options:
-
» Find Near Map Center
Use the Find Near Map Center search option to search for categories of
information such as geographic features, waypoints, points of interest, etc.
near your current map center. The number of search results returned is based on
the amount of search results available (not on distance). Find Near Map Center
searches stop after 200 search results are found.
-
» Find By Name
Use the Find By Name search option to search for a specific location, such as a
specific address, point of interest, etc. To narrow your search results, you
can choose either the Contains or Begins With option to search for results that
contain or begin with certain character(s).
The Waypoints Page
You can use the Mark button (labeled with a puch pin) on the Earthmate GPS PN-20 to mark a waypoint at your current GPS location (or at the current map center/cursor position if panning). Once you add a waypoint you can customize the waypoint name, coordinates, and comments. The device will store up to 1000 waypoints in internal memory.
The Routes Page
There are many ways to create routes on the Earthmate GPS PN-20.
You can create a route:
-
» From your current GPS location to a waypoint
-
» From your current GPS location to a Find search result
-
» Between two waypoints
-
» Between two Find search results
-
» Between a waypoint and a Find search result
Once you have created a route, you can view its directions, edit
the route, delete the route, and more. The device will store up to 50 routes in
internal memory.
Routing is possible for both walking and in-vehicle situations,
using either the direct or road routing settings. On-device routing for road
routes should be used for fairly short routes, with longer routes best
generated on the desktop in advance and transferred to the GPS. The on-device
road routing is fine for cross-town and in-state routes and includes an audible
beep warning before each turn, as well as the ability to recalculate routes
when you stray off course.
The Tracks Page
Earthmate GPS PN-20 is set to record GPS tracks by default. That
means that the device will create a track ("breadcrumb trail") of your travels
until you turn recording off.
The Tracks Page lets you save, clear, or follow the current
track, or view/follow an existing track. The device will store up to 10 track
logs (with a 10,000 point limit each) in internal memory.
The Sun-Moon Page
Use the Sun/Moon Page to view the sunrise/sunset and
moonrise/moonset information as well as the moon phase information for your
current GPS location. The current date and time also display at the top of the
screen.
The Tide Page
Use the Tide Page to view high and low tide information based on
a specific time, date, and tide station.
NetLink & FREE Aerial Imagery
The included XMap 5.2 desktop software comes with $100 of Free Aerial Data Packet (ADP) downloads from DeLorme. These ADPs are accessed from within the software’s NetLink tab, where you choose exactly the geographic areas you want to download. The ADPs consist of three layered data types: black and white aerial imagery (DOQQs), colorized satellite imagery (SAT-10), and scanned USGS 7.5-minute quad maps. You can select which of these layers you want to transfer to the PN-20 using the Handheld Options tab in XMap 5.2.
Drawing & Symbol Sets
DeLorme includes an extensive set of symbols within XMap 5.2, that you can transfer to the PN-20. These include symbols from the DeLorme Atlas & Gazetteer series, survey symbols, and cartographic symbols, as well as the ability to create your own custom symbols using the included XSym tool.
Measuring
The on-device measuring tool lets you measure individual legs or
cumulative, multiple legs. Measurements can be made on any of the available
data types, including the imagery layers, which allow for precise measurements
of property boundaries or for measurements between waypoints.
Basic Functions
Batteries
The Earthmate GPS PN-20 is a battery-powered device. It can be powered by one
rechargeable Lithium-ion battery or two AA batteries (NiCd, NiMH, alkaline, or
lithium). Two AA batteries and the Travel Power Kit are included.
On-Off
The Power button is located at the bottom-right corner of the button area. To
turn on the Earthmate, press and hold the Power button for 1.5 seconds. The
Satellites Page is displayed by default. To turn off the Earthmate, press the
Power button and then press the ENTER button to confirm you want to turn the
Earthmate GPS PN-20 off.
Button Use
The buttons on the Earthmate GPS PN-20 provide you with access to all of the
functionality on the device. Each button has a unique purpose:
-
» In/Out
The IN and OUT button lets you zoom in or zoom out on the map.
-
» Page
The PAGE button lets you scroll through all of the enabled "Pages."
-
» Menu
The MENU button provides access to a multitude of functions. Page menus
are divided into top and bottom sections that are separated by a line. The
items in the top section are specific to the Page that is currently active. The
items in the bottom section are standard menu options, that are available from
any Page.
-
» Find
The FIND button is labeled with a magnifying glass and lets you search for a
waypoint, address, coordinate, and more. You can search for a location based on
its name or its proximity to the current map center.
-
» Mark Waypoint
The Mark button is labeled with a push pin and can be used to mark a waypoint
at your current GPS location or the cursor location (if panning).
-
» Arrow Keypad
You can use the ARROW keypad to:
-
› Move the map cursor left, right, up, or down
-
› Pan the map by moving the cursor on the edge of the map
-
› Highlight options in menus or lists
-
› Highlight characters in the keyboard screen
-
» Enter
You can use the ENTER button to:
-
› Select a menu entry or on-screen button/field
-
› Get information about a point on the map
-
» Power
Use the Power button to turn the Earthmate on and off, to change the backlight
settings, or to reset the device
Transferring Map Data to the Earthmate GPS PN-20
The Earthmate GPS PN-20 comes equipped with an overview-level base map showing world and U.S. coverage. While this provides a great view of a large area, chances are you will want a detailed view of a smaller area for hiking, geocaching, and other outdoor activities. More detailed maps can be transferred to the Earthmate GPS PN-20 using the included XMap 5.2 DVD software.
For those times when you may not have the software with you but have Internet access, we also offer an online map cutter for Earthmate GPS PN-20—Visit
http://data.delorme.com. You must have an Internet connection to use this Web site.
You can transfer many types of data such as satellite imagery, aerial imagery, USGS Topo Quad maps, and more. You can save maps in internal memory or on a removable memory (SD) card (in the Maps directory).
Storing Data on the PN-20
The Earthmate GPS PN-20 stores tracks, routes, waypoints, and
the base map data in its internal memory.
Maps that are transferred to the Earthmate can be saved in internal memory or
on a removable memory (SD) card (2 GB or less) located under the battery
compartment. 1-GB SD Card and Reader are included with this product bundle.
Based on power consumption tests conducted here at DeLorme, and using the average selling price for each power option shown, we recommend the following battery types when factoring cost per hour. Of course, any AA battery type will work and this information is provided to give you a baseline.
* Subject to accuracy degradation to 100m 2DRMS under
the United States Department of Defense-imposed Selective Availability Program.
DeLorme warrants that your Earthmate GPS PN-20 will be free from
defects in materials and workmanship for one year from the date of purchase. If
your Earthmate GPS PN-20 fails in normal use, DeLorme will, at its sole option,
either repair or replace the unit. DeLorme reserves the right to either repair
or replace the unit with a new or refurbished unit at its sole discretion. Such
repairs or replacements will be made at no charge for labor or materials;
however, the customer will be responsible for any shipping charges incurred to
send the device to DeLorme. The repaired or replaced product will be warranted
for 90 days from the date of return shipment, or for the balance of the
original warranty, whichever is longer. This warranty does not cover failures
due to abuse, misuse, accidents, or unauthorized disassembly or modification.
Any repairs not performed by DeLorme will void this warranty.
DELORME DISCLAIMS ANY LIABILITY FOR ANY SPECIAL, INDIRECT,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDI NG, BUT NOT LIMITED TO, LOSS OF
REVENUES OR PROFITS, EVEN IF DELORME HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. THIS LIMITED WARRANTY CONTAINED HEREIN IS IN LIEU OF ALL OTHER
EXPRESS WARRANTIES. ANY AND ALL IMPLIED WARRANTIES, INCLUDING ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE, SHALL
LAST FOR 1 YEAR.
This warranty gives you specific legal rights and you may also
have other rights which vary from state to state. Some states do not allow the
exclusion or limitation of relief such as incidental or consequential damages,
or limitations on how long an implied warranty lasts, so the above limitations
or exclusions may not apply to you. This warranty applies to the original
purchaser of the product ONLY. REMINDER: Be sure to retain the sales receipt
proving the date of your original purchase. This will be needed if warranty
service is ever required. DeLorme reserves the right to refuse warranty if a
receipt is not provided or if the receipt is incomplete/illegible.
MY ACCOUNT
Checking-Out Data
View
Screens
